ΤΕΡΜΑΤΙΚΟΙ ΔΙΑΚΟΠΤΕΣ ΓΕΡΑΝΩΝ RAVIOLI
Worm drive switches, double insulating box.
Application of encoders and other position sensors.
Additional accessories.
FRM
ΓΕΝΙΚΟΣ ΚΑΤΑΛΟΓΟΣ
Main features
The rotary limit switch is a device which allows you to control the movement of industrial and building machines.
The shaft is connected to the motor, so that, after a precise number of turns, the cams cause the intervention of the internal contacts.
The innovative and thorough regulation of the cams allows you to set the microswitches working point linearly and micrometrically.
FRM limit switch is equipped with 3 internal rotation axes, whose ratios for each exit can be different.
A forth rotation axis is available for the application of a speed reader. Ratios range from 1:1 up to 1:900, and the application of encoders, potentiometers or some other sensors in addition to the group of microswitches, realizes in the same device an analogic or digital output, which can be properly read.
Contacts are positive-opening (EN 60947-5-1), which improves the worker’s safe.
The series ranges several accessories, such as cog wheels, male shafts, flexible shafts, flanges, internal connections plates.
Ravioli is focusing its activity on products in the respect of people, following the standards which are defined in its Code of Ethic Behaviour. Such products have been studied in order to improve the workers’ safety, and they do not contain any substances which is harmful for the environment.
Technical features
Insulation voltage250V~
Maximum operating voltage250V~
Black lower casingreinforced nylon
Yellow covertermoplastic, high mechanical and thermical resistance
Operating temperature- 20 °C + 60 °C
- 40 °C + 60 °C (on demand)
Driveworm screws
Cable entriesstandard: 2 glands M20×1,5
Options: more glands
Protection degreeIP 66 EN 60529
Protection against contact voltagesdouble insulation EN 60439-1
Max. rotation speed500 rpm
HomologationCE
UL - (c)UL execution on demand
Weightapproximately 800 g
Productmade in Italy
For years Ravioli has been focusing its production on renewable energy.
Driver FRM limit switches, which are also used in the wind turbines and solar tracks, are included in our Green e-motion Program. They represent a significant step in our project and our participation to the sustainability.
Driver FRM limit switches are in accordance to the following Norms:
2006/42/CE Machine Directive
2006/95/CE Low Voltage Directive
2002/95/CE RoHS Directive
1907/2006 REACH
EN 60947-1 Low-voltagwe switchgears and controls gears
EN 60947-5-1 Control circuit devices
EN 60204-1 Safety of machinery
EN 60529 Protection degrees
UL 508 Industrial control equipment
Driver FRM limit switches are guaranteed by our EC Certificate of Conformity, available upon request, where it is declared that such product has been manufactured by Ravioli in accordance to defined and acknowledged Safety Regulations, and in compliance with the Quality standards stated in our ISO 901-2008 Quality System Certificate
FRS
Driver rotary limit switch FRS is a device with IP65 protection degree which allows you to control the movement of industrial and building machines. The shaft is connected to the motor, so that, after a certain number of turns, the cams make the switches work, and then they can carry out their pre-set manoeuvre. The easy and thorough regulation of the cams allows you to set the rapid trip microswitches working point linearly and micrometrically. The choice of different cam profiles allows you to modify the limit switches function diagram.
FRM independent 1NO 1NC contact
The rotary limit switch is a device which allows you to control the movement of industrial and building machines. The shaft is connected to the motor, so that, after a certain number of turns, the cams make the switches work, and then they can carry out their pre-set manoeuvre. The range of FCN rotary limit switches has been planned with a particular internal symmetry that allows you to have a series of 5 microswitches (on-off exits) as well as some other linear exits, and a potentiometer in the same box. The innovative and thorough regulation of the cams allows you to set the microswitches working point linearly and micrometrically. Reduction ratios range turns out to be remarkably large, since microswitches can be fitted with guaranteed opening (EN 60947-5-1) as well as deviation or progressive double opening contacts. The choice of different cam profiles allows you to modify the limit switches function diagram.
FCN
FCR
The worm drive limit switches FCR are particulary suitable for controlling the stops of the lifting electric circuits on building cranes and bridge cranes.
The range includes, among the others, the limit switches equipped with up to 4 microswitches and respective adjustable cams, profile type 1 (standard - white coloured).
On request two other types of cams are available: the profile type 2 (grey coloured) or type 3 (red coloured). They are essential in any particular case to modify the operation chart.
The worm drive limit switches are furthermore supplied in two different versions: either with slow guaranteed opening switches (CEI 17.12 chapter 492) or with changeover quick break switches.
The outer casing is made of termoplastic material with high mechanical and temperature variation resistance.
FRM data
FCR data
FCN data
FRS data
